Kitchen Butcher Block Finish Durability Design

0

A butcher block finish that will not withstand daily use is an inherently flawed choice. However, you have no need to give up the appearance for greater durability. A butcher block opens many design possibilities for a kitchen. Butcher block today’s choices go beyond the quaint butcher block strips of yesteryear. The consumer will find several patterns for the butcher block in the current market. Butcher blocks are a modern invention originally designed for cutting meat by professional butchers. The first butcher blocks were made of hard northern maple due to the hardness of the wood, which makes it very durable. In fact, a butcher block was so thick and sturdy that a butcher usually uses the same long butcher block of his career. When the surface was a face and rough, the butcher brush off the top of the block to create a new smooth surface.

Nowadays, butcher block is also use for countertops and tables. Butcher block is also available in other types of hardwoods such as oak, cherry, and walnut. of the sand from the butcher block finishes safe food table using an orbital sander loaded with 150- to 180 sanding paper. Keep the sander moving smoothly on the table. Stopping in one place will result in uneven sanding work. Change sandpaper and sand again with 220 grit sandpaper. Move sander in the direction of the wood grain. Soften the table by sanding with 320-grit sandpaper. The fine grain of the 320 sandpaper will set the fibers and leave the table ready for staining if desired. Of the stain with a transparent penetration stain or a semitransparent stain. Use a brush to apply the stain, stain it with the application of the grain of the wood.

Allow the dye to dry according to the manufacturer’s instructions. Rub the table with tung oil applied with a soft cloth. Wait five to 10 minutes and then wipe with a dry cloth to remove excess tung oil butcher block. Let it dry according to the manufacturer’s instructions. Rough to the end on the table using # 0000 steel wool. Clean the table free of sanding dust. Apply another layer of tung oil, following instructions from the previous step. Tung oil naturally creates a waterproof and alcohol proof finish. Tung oil also resists most food stains. According to Jean Ballance of the Cooperative Extension Service of North Carolina, the application of seven thin layers of tung oil creates a hard, scratch-resistant finish. Teak oil is a secular protective finish of many wood surfaces, including the original butcher blocks.

Share.

Comments are closed.