How to Cover DIY Cabinet Doors : Makeover Breadboard Cabinets

DIY cabinet doors and you want to renovate them, you should decide how to do that partly by considering what kind of coating is currently on the doors. If the doors are laminated, then painting or dyeing is not an option. One possibility is to place new tabs over existing laminates. Self-adhesive veneer comes in sheets of paper backing that peel off to reveal the glue. Make sure the sheets you buy are large enough to completely cover the face of the door and then some.

Instructions

Remove the fitting inset cabinet doors from the cabinet, using your screwdriver to remove the hinges. Put them on a workbench. Sand the surface of the doors with grinding machine. Do not attempt to erase the existing tabs; just get it boring and flat, remove shine. Measure the door in both directions. Transfer measurement for a piece of tabs. Add an inch around. Mark the incision with your pen and square on the back of tabs, over paper backing. Cut tabs with your user blade, cut through paper backing and deep scoring tabs. Break off the cuts. Pull the paper out of the veneer and press it immediately to the door, leaving an inch around. Tighten it firmly with the heel of the palms at different points.

This digital photography of Makeover Breadboard Cabinets has dimension 1024 x 632 pixels, you can download and enlist the Makeover Breadboard Cabinets digital photography by right click on the clicking the right mouse to get the high definition version.

Here is wanted tip on Adding Trim To Cabinet Doors. We have the world class source for Adding Trim To Cabinet Doors. Check it out for yourself! You can gather Makeover Breadboard Cabinets guide and see the latest How to Cover DIY Cabinet Doors in here.

Back to How to Cover DIY Cabinet Doors

Comments are closed.