Do It Yourself Wooden Tool Chest Custom Styles : Wooden Tool Chest Garage With Wheels

Measure the center of each end piece on the top and measure a little less than a quarter of an inch on each side of the center mark. Make a line of each of these points that extends up to 2 inches. Connect them with a straight line at the bottom. Cut the groove you just measured. Cut a handle from a 1-by-2 inch board that measures 20 inches long. Use sandpaper to sand the larger slot until the handle fits tightly. Stick it in place with wood glue and let it dry. Nail the sides in the wooden toolbox, using wood glue if necessary to reinforce them. Nail the lower part after the glue has dried, if the glue has been used. Use small nails to reinforce the handle if necessary.

This images of Wooden Tool Chest Garage With Wheels has dimension 800 x 600 pixels, you can download and obtain the Wooden Tool Chest Garage With Wheels images by right click on the right click to get the high resolution version.

Here is required advice on Wooden Tool Chest Modern. We have the excellent source for Wooden Tool Chest Modern. Check it out for yourself! You can acquire Wooden Tool Chest Garage With Wheels guide and view the latest Do It Yourself Wooden Tool Chest Custom Styles in here.

Back to Do It Yourself Wooden Tool Chest Custom Styles

Comments are closed.