Do It Yourself Wooden Tool Chest Custom Styles : Unfinished Wooden Tool Box Simple

Measure the center of each end piece on the top and measure a little less than a quarter of an inch on each side of the center mark. Make a line of each of these points that extends up to 2 inches. Connect them with a straight line at the bottom. Cut the groove you just measured. Cut a handle from a 1-by-2 inch board that measures 20 inches long. Use sandpaper to sand the larger slot until the handle fits tightly. Stick it in place with wood glue and let it dry. Nail the sides in the wooden toolbox, using wood glue if necessary to reinforce them. Nail the lower part after the glue has dried, if the glue has been used. Use small nails to reinforce the handle if necessary.

This photo of Unfinished Wooden Tool Box Simple has dimension 1008 x 730 pixels, you can download and enlist the Unfinished Wooden Tool Box Simple photo by right click on the right click to get the high definition version.

Here is necessary knowledge on Wooden Tool Chest Modern. We have the best source for Wooden Tool Chest Modern. Check it out for yourself! You can discover Unfinished Wooden Tool Box Simple guide and look the latest Do It Yourself Wooden Tool Chest Custom Styles in here.

Back to Do It Yourself Wooden Tool Chest Custom Styles

Comments are closed.