Do It Yourself Wooden Tool Chest Custom Styles : Finishing Pine Tool Box Plans

Measure the center of each end piece on the top and measure a little less than a quarter of an inch on each side of the center mark. Make a line of each of these points that extends up to 2 inches. Connect them with a straight line at the bottom. Cut the groove you just measured. Cut a handle from a 1-by-2 inch board that measures 20 inches long. Use sandpaper to sand the larger slot until the handle fits tightly. Stick it in place with wood glue and let it dry. Nail the sides in the wooden toolbox, using wood glue if necessary to reinforce them. Nail the lower part after the glue has dried, if the glue has been used. Use small nails to reinforce the handle if necessary.

This images of Finishing Pine Tool Box Plans has dimension 807 x 670 pixels, you can download and obtain the Finishing Pine Tool Box Plans images by right click on the clicking the right mouse to get the high definition version.

Here is needful clue on Wooden Tool Chest Ideas. We have the excellent sources for Wooden Tool Chest Ideas. Check it out for yourself! You can get Finishing Pine Tool Box Plans guide and read the latest Do It Yourself Wooden Tool Chest Custom Styles in here.

Back to Do It Yourself Wooden Tool Chest Custom Styles

Comments are closed.