Building Wooden Keepsake Box : Large Keepsake Box

Stand up the other two pieces of plywood, with dado corresponding on top and sides. Glue all vertical dados and pull the pieces together. Release two tape clips over the drawer and tighten until glue penetrates, this square will come and bring the drawer together. Hammers four nails in each corner evenly distributed between the bands. Spread glue around dado on top, which is actually bottom and release the lower piece of plywood in dado, trim if it’s too hard. Nail around the entire perimeter of the bottom.

This digital imagery of Large Keepsake Box has dimension 1000 x 728 pixels, you can download and enlist the Large Keepsake Box digital imagery by right click on the right click to get the large version.

Here is essential recommendation on DIY Keepsake Box. We have the prime assets for DIY Keepsake Box. Check it out for yourself! You can get Large Keepsake Box guide and read the latest Building Wooden Keepsake Box in here.

Back to Building Wooden Keepsake Box

Comments are closed.