Building Garage Work Table : Modern Sears Workbench

Cut six, 22-inch lengths of wood from a 2×4. Place a piece of wood saw on top of each workbench harbor freight. Butt end of wood up against wall rule. Secure wood on the bracket with a wooden screw. Measure and cut three pieces of wood from a 2×4 which is approximately 109 inches. Add these lengths of wood to brackets. Place a piece against the wall, one in the middle and one on the outer edge. Secure these with nails. Place the remaining smaller lengths of wood at the end of the cross supports. Attach them into place with nails. Make the last 2×4 to measure 110 inches. Attach this piece to the front of the workbench by nailing it on the front of the support piece.

This pics of Modern Sears Workbench has dimension 800 x 600 pixels, you can download and obtain the Modern Sears Workbench pics by right click on the right click to get the large version.

Here is required chapter on Metal Workbench with Drawers. We have the cool step for Metal Workbench with Drawers. Check it out for yourself! You can find Modern Sears Workbench guide and view the latest Building Garage Work Table in here.

Back to Building Garage Work Table

Comments are closed.