Building Floor to Ceiling Shelves : Room Divider Storage Cabinets

Measure the height of your wall from floor to ceiling. Cut two planks and two strips to match this dimension. Measure the width of the floor to ceiling tension shelves, or wall section, you want to cover with your shelves. Cut planks and stripes to match this dimension, cut as many as you need to build the number of shelves you want. For best results, aim for a shelf per 12 to 18 inches of vertical space. If you want to cover more than 36 inches of wall surfaces, build multiple devices to avoid rinsing. Sand all faces in your work. If you want to paint or paint the wood, apply your first coat now and wait to dry.

Install shelves

Locate wall rails on the part of the wall that you want to cover. Mark his place with a pencil. Place one of your wide strips on the wall where you want the shelves to be. Set it at the appropriate height and use your level to set it in parallel with the ground. Fix it in place by driving a nail through the strip at each point where it crosses a wall line. Repeat step two until you have mounted a strip on the wall for each shelf you want. Fit the strips so that their edges are aligned. You can use your level to check this. Set a height of plank length at the end so that its surface is located at the ends of one side of the strip. Fix it in place by driving two nails through the shelf and into the end of each of your strips. Repeat step 4 to mount the other shelf to the opposite side.

This picture of Room Divider Storage Cabinets has dimension 800 x 1067 pixels, you can download and obtain the Room Divider Storage Cabinets picture by right click on the right click to get the high resolution version.

Here is foremost advice on Bookcase with Doors. We have the greatest resources for Bookcase with Doors. Check it out for yourself! You can gather Room Divider Storage Cabinets guide and view the latest Building Floor to Ceiling Shelves in here.

Back to Building Floor to Ceiling Shelves

Comments are closed.