Building Benchtop Router Table : Oreiginal Best Router Tables

Cover one side of the particle router and table combo with adhesive. Center a piece of laminate over particleboard and press hard. Use a router with a color trims a bit to trim the laminate even with the edge of particleboard. Cut 2-inch square hardwood to the desired height for the table legs. Turn chipboard over so the laminated side is facing downwards and drill holes in chipboard 1 cm from the corners. Drill through the ends of the legs and use 21/2-inch wooden screw to secure them. Kitty and true bosses for the wooden screws. Cover the exposed side of particleboard with adhesive. Set and trim the other half of the laminate. Cut and trim the 1/4 inch hardwood strips edge table. Use carpentry glue and finishing nails to join the edge strips to particleboard. The upper edge of the strips should be at even height with the top surface of the laminate. Color the edge strips and table legs as desired.

This photograph of Oreiginal Best Router Tables has dimension 1024 x 683 pixels, you can download and gain the Oreiginal Best Router Tables photograph by right click on the right click to get the high definition version.

Here is imperative tip on Best Bench top Router Table Review. We have the excellent source for Best Bench top Router Table Review. Check it out for yourself! You can discover Oreiginal Best Router Tables guide and view the latest Building Benchtop Router Table in here.

Back to Building Benchtop Router Table

Comments are closed.