Building Benchtop Router Table : Image Wood Routers

Cover one side of the particle router and table combo with adhesive. Center a piece of laminate over particleboard and press hard. Use a router with a color trims a bit to trim the laminate even with the edge of particleboard. Cut 2-inch square hardwood to the desired height for the table legs. Turn chipboard over so the laminated side is facing downwards and drill holes in chipboard 1 cm from the corners. Drill through the ends of the legs and use 21/2-inch wooden screw to secure them. Kitty and true bosses for the wooden screws. Cover the exposed side of particleboard with adhesive. Set and trim the other half of the laminate. Cut and trim the 1/4 inch hardwood strips edge table. Use carpentry glue and finishing nails to join the edge strips to particleboard. The upper edge of the strips should be at even height with the top surface of the laminate. Color the edge strips and table legs as desired.

This photograph of Image Wood Routers has dimension 1280 x 960 pixels, you can download and take the Image Wood Routers photograph by right click on the clicking the right mouse to get the hi-res version.

Here is main science on Router Tables Reviews. We have the excellent substance for Router Tables Reviews. Check it out for yourself! You can acquire Image Wood Routers guide and view the latest Building Benchtop Router Table in here.

Back to Building Benchtop Router Table

Comments are closed.