Building Benchtop Router Table : Easy Best Router For Router Table

Cover one side of the particle router and table combo with adhesive. Center a piece of laminate over particleboard and press hard. Use a router with a color trims a bit to trim the laminate even with the edge of particleboard. Cut 2-inch square hardwood to the desired height for the table legs. Turn chipboard over so the laminated side is facing downwards and drill holes in chipboard 1 cm from the corners. Drill through the ends of the legs and use 21/2-inch wooden screw to secure them. Kitty and true bosses for the wooden screws. Cover the exposed side of particleboard with adhesive. Set and trim the other half of the laminate. Cut and trim the 1/4 inch hardwood strips edge table. Use carpentry glue and finishing nails to join the edge strips to particleboard. The upper edge of the strips should be at even height with the top surface of the laminate. Color the edge strips and table legs as desired.

This image of Easy Best Router For Router Table has dimension 1280 x 720 pixels, you can download and obtain the Easy Best Router For Router Table image by right click on the right click to get the large version.

Here is foremost data on Best Bench top Router Table Review. We have the excellent assets for Best Bench top Router Table Review. Check it out for yourself! You can find Easy Best Router For Router Table guide and view the latest Building Benchtop Router Table in here.

Back to Building Benchtop Router Table

Comments are closed.