Building Benchtop Router Table : Best Woodworking Routers

Cover one side of the particle router and table combo with adhesive. Center a piece of laminate over particleboard and press hard. Use a router with a color trims a bit to trim the laminate even with the edge of particleboard. Cut 2-inch square hardwood to the desired height for the table legs. Turn chipboard over so the laminated side is facing downwards and drill holes in chipboard 1 cm from the corners. Drill through the ends of the legs and use 21/2-inch wooden screw to secure them. Kitty and true bosses for the wooden screws. Cover the exposed side of particleboard with adhesive. Set and trim the other half of the laminate. Cut and trim the 1/4 inch hardwood strips edge table. Use carpentry glue and finishing nails to join the edge strips to particleboard. The upper edge of the strips should be at even height with the top surface of the laminate. Color the edge strips and table legs as desired.

This digital imagery of Best Woodworking Routers has dimension 940 x 900 pixels, you can download and obtain the Best Woodworking Routers digital imagery by right click on the right click to get the large version.

Here is crucial data on Top Rated Router Tables. We have the tops source for Top Rated Router Tables. Check it out for yourself! You can gather Best Woodworking Routers guide and look the latest Building Benchtop Router Table in here.

Back to Building Benchtop Router Table

Comments are closed.