Build Murphy Bed Ideas

0

Build a murphy bed for homeowners who want to free up some space or create a multifunctional space. Murphy beds make a big home improvement project resulting in a bed those folds up and into a cabinet along a wall when not in use. When guests arrive, you simply drag the bed down to be used as a regular bed.

Place

Before picking up materials or tools needed to build a Murphy bed design, you need to decide if the room gives the smallest open wall space for the bed. For a double bed, you need at least a 4-foot-wide area of ​​space along the wall, while a larger bed requires more. You also need 7 feet of space in front of the bed to open it. Make sure you can easily move all the furniture out of the way. Most local building regulations require that the Murphy bed room contains a window large enough.

Components

The components of a Murphy bed include bed frame, mattress, and cabinets and lifting mechanism. The bed frame that holds the mattress must fit into the cabinet when not in use; so most Murphy beds do not contain a box in the spring because it takes up too much space. The mattress thickness typically measures 12 inches or less to fit the cabinet without taking up too much space in the room.

Elevating mechanisms

A Murphy bed requires the use of a lifting mechanism that balances the weight of bed frame and mattress to keep them on the floor. The mechanism also helps lift the bed back into the wall when not in use. Lifting mechanisms consist of either a spring or a piston system. Spring systems have adjustable tension, while piston systems are nonadjustable. Flask or spring system often comes in kits that contain all the hardware required to install one. Some of the lifting kit includes building plans for the bed as well.

Equipment and materials

Although you can build your Murphy bed from scratch, some companies, such as Mode, provide complete plans to build a bed with pieces available from IKEA, along with some hardware and a drill. If you choose to build your own basic hand tools such as a tape measure and hammer is required. You also need a table saw or a circular saw with a plywood blade to cut your plywood to length. Studs to connect the cabinet to the wall are also needed, along with plywood, sandpaper and stain to paint the wood.

 

Share.

Comments are closed.