Build Hanging Wooden Paper Towel Holder : Wall Mount Paper Towel Holder

And cut a slot along the L shapes that is 3/8 inches deep and 3/8-inch wide. These will be the side panels of the paper towel holder, and the slots will hold the paper towel rod in place. Support the side panels so that the slots face each other. And place a 1-by-3-by-12-inch piece of wood between the side panels at the end opposite the slots. The parts should form corners at right angles to the ends of the 12-inch piece. Which will be the top part of the paper towel holder. Attach to the sides of the top with two 1 1/2-inch screws driven by the sides at the ends of the top piece. Drill a 1/4-inch wide and 1/2-inch deep hole in the center of the ends of a 1 1/2-inch long 1-inch wide piece of dowel.

This photograph of Wall Mount Paper Towel Holder has dimension 1500 x 999 pixels, you can download and obtain the Wall Mount Paper Towel Holder photograph by right click on the clicking the right mouse to get the high-res version.

Here is crucial chapter on Paper Towel Holder Home Depot. We have the tops step for Paper Towel Holder Home Depot. Check it out for yourself! You can gather Wall Mount Paper Towel Holder guide and view the latest Build Hanging Wooden Paper Towel Holder in here.

Back to Build Hanging Wooden Paper Towel Holder

Comments are closed.