Build Hanging Wooden Paper Towel Holder : Paper Towel Holder Wall Mount

Glue a 1-inch long, 1/4-inch wide spike on each end of the 1-inch-thick spike with wood glue. Push the smaller pin to the right into the drilled holes. So that half an inch of the smaller pin pieces protrude from the end of the long rod. Place the wooden paper towel holder plans on the bottom of a cabinet or other location. And use 1 1/2 inch screws driven through the top of the paper towel holder to attach the paper towel holder. Put a roll of paper towels on the dowel rod. Slide the ends of the small spike into the slots on the side of the paper towel holder. Making sure it goes all the way along the long side of the L and rests on the short side of the L to keep it on its place.

This picture of Paper Towel Holder Wall Mount has dimension 960 x 720 pixels, you can download and obtain the Paper Towel Holder Wall Mount picture by right click on the clicking the right mouse to get the high definition version.

Here is fundamental advice on Wrought Iron Paper Towel Holder. We have the finest assets for Wrought Iron Paper Towel Holder. Check it out for yourself! You can find Paper Towel Holder Wall Mount guide and look the latest Build Hanging Wooden Paper Towel Holder in here.

Back to Build Hanging Wooden Paper Towel Holder

Comments are closed.