Build Hanging Wooden Paper Towel Holder : Paper Towel Holder Home Depot

And cut a slot along the L shapes that is 3/8 inches deep and 3/8-inch wide. These will be the side panels of the paper towel holder, and the slots will hold the paper towel rod in place. Support the side panels so that the slots face each other. And place a 1-by-3-by-12-inch piece of wood between the side panels at the end opposite the slots. The parts should form corners at right angles to the ends of the 12-inch piece. Which will be the top part of the paper towel holder. Attach to the sides of the top with two 1 1/2-inch screws driven by the sides at the ends of the top piece. Drill a 1/4-inch wide and 1/2-inch deep hole in the center of the ends of a 1 1/2-inch long 1-inch wide piece of dowel.

This digital photography of Paper Towel Holder Home Depot has dimension 800 x 800 pixels, you can download and gain the Paper Towel Holder Home Depot digital photography by right click on the clicking the right mouse to get the high-res version.

Here is foremost tip on Wooden Paper Towel Holder Under Cabinet. We have the greatest method for Wooden Paper Towel Holder Under Cabinet. Check it out for yourself! You can acquire Paper Towel Holder Home Depot guide and view the latest Build Hanging Wooden Paper Towel Holder in here.

Back to Build Hanging Wooden Paper Towel Holder

Comments are closed.